base on A customized version of https://github.com/DualTachyon/uv-k5-firmware # Open reimplementation of the Quan Sheng UV-K5 v2.1.27 firmware This repository is a cloned and customized version of DualTachyon's open firmware found here .. https://github.com/DualTachyon/uv-k5-firmware .. a cool achievement ! Use this firmware/code ENTIRELY at your own risk. This firmware is totally experimental, and at times will go completely tits up (break your radio). There is absolutely no guarantee that it will work in any way shape or form on your radio(s), it may even brick your radio(s). You're on your own. NO REFUNDS, ever ! ## Observed radio boot problems After having two UV-K5(8) radios for a while now, and I don't know how many programming lead insertions/deinsertions (lots n lots!) both radios are now having trouble booting up into either the bootloader and/or the firmware. I suspect the reason being something to do with the the 3.5mm/2.5mm mic jack sockets or the volume control pot, either that or broken thru-hole plating in the PCB or such like. Need to find matching replacements to confirm this though (or just temp short the terminals that are suppose to be shorted at power on). <p float="left"> <img src="/images/top.png" height=500 /> <img src="/images/bot.png" height=500 /> </p> # Radio performance Please note that the Quansheng UV-Kx radios are not professional quality transceivers, their performance is strictly limited. The RX front end has no track-tuned band pass filtering at all, and so are wide band/wide open to any and all signals over a large frequency range. But, they are nice toys for the price, fun to play with. # User customization You can customize the firmware by enabling/disabling various compile options, this allows us to remove certain firmware features in order to make room in the flash for others. You'll find the options at the top of "Makefile" ('0' = remove code, '1' = include code) .. ``` ENABLE_CLANG := 0 **1 = builds with clang instead of gcc (LTO will be disabled if you enable this) ENABLE_SWD := 0 1 = enable CPU's SWD port (debugging/flash-programming) ENABLE_OVERLAY := 0 1 = cpu FLASH stuff, not needed ENABLE_LTO := 1 **1 = reduces size of compiled firmware but might break EEPROM reads (OVERLAY will be disabled if you enable this) ENABLE_UART := 1 1 = enable config radio via programming lead ENABLE_UART_DEBUG := 0 1 = enable UART debug messages via the serial programming lead ENABLE_AIRCOPY := 0 1 = enable clone radio-to-radio via RF ENABLE_AIRCOPY_REMEMBER_FREQ := 1 1 = enable remember the aircopy frequency ENABLE_AIRCOPY_RX_REBOOT := 0 1 = auto reboot on an aircopy successful RX completion ENABLE_FMRADIO_64_76 := 0 1 = enable FM radio 64MHz ~ 76MHz ENABLE_FMRADIO_76_90 := 0 1 = enable FM radio 76MHz ~ 90MHz ENABLE_FMRADIO_76_108 := 0 1 = enable FM radio 76MHz ~ 108MHz ENABLE_FMRADIO_875_108 := 1 1 = enable FM radio 87.5MHz ~ 108MHz ENABLE_FMRADIO_64_108 := 0 1 = enable the FM radios full frequency range ENABLE_NOAA := 0 1 = enable NOAA stuff (only of any use in the USA) ENABLE_VOICE := 0 1 = enable voices ENABLE_MUTE_RADIO_FOR_VOICE := 1 1 = mute the radios audio when a voice is playing ENABLE_VOX := 0 1 = voice operated transmission ENABLE_VOX_MORE_SENSITIVE := 1 1 = make VOX more sensitive ENABLE_ALARM := 0 1 = enable TX alarm ENABLE_TX_TONE_HZ := 1750 side key and tone burst tx frequency 0 = disable >0 = frequency of audio tone ENABLE_MDC1200 := 0 1 = enable MDC1200 TX/RX + menu TX option ENABLE_MDC1200_SHOW_OP_ARG := 1 1 = show RX opcode and argument values when MDC1200 is RX'ed ENABLE_MDC1200_SIDE_BEEP := 1 1 = enable short side tone/beep when MDC1200 is sent - so user knows when they can start taking after PTT pressed ENABLE_PWRON_PASSWORD := 0 1 = include power-on password code ENABLE_RESET_AES_KEY := 1 1 = reset/clear the AES key stored in the eeprom (only if it's set) ENABLE_BIG_FREQ := 0 1 = big font frequencies (like original QS firmware) ENABLE_DTMF_CALLING := 0 1 = enable the DTMF calling/paging features ENABLE_DTMF_LIVE_DECODER := 0 1 = enable the live DTMF display/decoder .. adds a menu option ENABLE_DTMF_TIMING_SETTINGS := 0 1 = enable the DTMF timing settings in the menu ENABLE_DTMF_CALL_FLASH_LIGHT := 0 1 = flash the flash light LED when a DTMF call is received ENABLE_SHOW_FREQ_IN_CHAN := 0 1 = indicate if frequency found in a channel ENABLE_SMALL_BOLD := 0 1 = bold channel name/no. (when name + freq channel display mode) ENABLE_TRIM_TRAILING_ZEROS := 0 1 = trim away any trailing zeros on frequencies ENABLE_WIDE_RX := 1 1 = full 18MHz to 1300MHz RX (though front-end/PA not designed for full range) ENABLE_TX_WHEN_AM := 0 1 = allow TX (always FM) when RX is set to AM ENABLE_F_CAL_MENU := 0 1 = enable frequency calibration hidden menu ENABLE_FM_DEV_CAL_MENU := 0 1 = enable FM deviation calibration hidden menu ENABLE_TX_UNLOCK_MENU := 0 1 = allow TX everywhere EXCEPT airband (108~137) .. TX harmonic content will cause interference to other services, do so entirely at your own risk ! ENABLE_TX_POWER_CAL_MENU := 0 1 = used to compute the TX power register values .. leave at '0' ENABLE_TX_POWER_FIX := 1 1 = fix the TX output power, L ~ 10mW, M ~ 500mW, H ~ 4W, U ~ user settable ENABLE_CTCSS_TAIL_PHASE_SHIFT := 0 1 = standard CTCSS tail phase shift rather than QS's own 55Hz tone method ENABLE_CONTRAST := 0 1 = add contrast menu ENABLE_BOOT_BEEPS := 0 1 = gives user audio feedback on volume knob position at boot-up ENABLE_FLASH_LIGHT_SOS_TONE := 0 1 = also do SOS in morse ENABLE_SHOW_CHARGE_LEVEL := 0 1 = show the charge level when the radio is on charge ENABLE_REVERSE_BAT_SYMBOL := 0 1 = mirror the battery symbol on the status bar (+ pole on the right) ENABLE_FREQ_SEARCH_LNA := 0 1 = keep this disabled ENABLE_FREQ_SEARCH_TIMEOUT := 0 1 = timeout if FREQ not found when using F+4 search function ENABLE_CODE_SEARCH_TIMEOUT := 0 1 = timeout if CTCSS/CDCSS not found when using F+* search function ENABLE_SCAN_IGNORE_LIST := 0 1 = ignore selected frequencies when scanning - add freqs to list with short */scan button when freq scanning, remove freq from list with long press MENU when not scanning ENABLE_SCAN_RANGES := 0 1 = adds menu option to auto select frequency scan range/step depending on your initial frequency ENABLE_DTMF_KILL_REVIVE := 0 1 = include kill and revive code ENABLE_AM_FIX := 1 1 = dynamically adjust the front end gains when in AM mode to help prevent AM demodulator saturation, ignore the on-screen RSSI level (for now) ENABLE_AM_FIX_SHOW_DATA := 0 1 = show debug data for the AM fix (still tweaking it) ENABLE_SQUELCH_MORE_SENSITIVE := 1 1 = make squelch levels a little bit more sensitive - I plan to let user adjust the values themselves ENABLE_SQ_OPEN_WITH_UP_DN_BUTTS := 1 1 = open the squelch when holding down UP or DN buttons when in frequency mode ENABLE_FASTER_CHANNEL_SCAN := 1 1 = increase the channel scan speed, but also make the squelch more twitchy ENABLE_COPY_CHAN_TO_VFO_TO_CHAN := 1 1 = long press M, copy channel to VFO, or VFO to channel ENABLE_TX_AUDIO_BAR := 0 1 = enable a menu option for showing a TX audio level bar ENABLE_TX_AUDIO_BACKLIGHT := 0 1 = backlight will follow TX audio level ENABLE_SIDE_BUTT_MENU := 0 1 = enable menu option for configuring the programmable side buttons ENABLE_KEYLOCK := 0 1 = enable keylock menu option + keylock code ENABLE_PANADAPTER := 1 1 = centered on the selected VFO RX frequency, only shows if dual-watch is disabled ENABLE_PANADAPTER_PEAK_FREQ := 0 1 = show the peak panadapter frequency ENABLE_SINGLE_VFO_CHAN := 1 1 = switch to single VFO display when dual-watch and cross-VFO are disabled ``` # New/modified function keys * Long-press 'M' ... Remove current frequency from ignore list (only if it's in the ignore frequency list) * Long-press 'M' ... Copy current frequency into a channel (takes you into the channel save menu) * Long-press 'M' ... Copy current channel into the same VFO, then switch the VFO to frequency mode * * Long-press '5' ... Toggle selected channel scanlist setting (if NOAA is disabled in Makefile) * or * Long-press '7' ... Toggle selected channel scanlist setting (if VOX is disabled in Makefile) * * Long-press '*' ... Start scanning, then toggles the scanning between scanlists 1, 2 or ALL channels * * Short-press '*' .. Add current frequency to the frequency ignore list (only if in frequency scan mode) # Edit channel/memory name 1. Press Menu button 2. Scroll to "CH NAM" (around number 17) 3. Press the Menu button to enter 4. Use up/down keys to choose the desired channel to edit 5. Press the Menu button again to enter edit name mode 6. Use the up/down keys to cycle through the letters etc 7. Press the Menu button again to move to the next character position 8. Repeat steps 6 and/or 7 till you reach the end 9. When it pops up the "Sure?" text, press Menu button to save, or Exit to cancel Press the Exit button at any time to cancel the edit and return to the main menu. Sounds complicated but once you done it a couple of times you'll be fine. When you're editing the name, you can enter digits (0 ~ 9) directly without having to use the up/down buttons to find them. # Some changes made from the Quansheng firmware * Various Quansheng firmware bugs fixed * Added new bugs * Mic menu includes max gain possible and is now in dB * AM RX everywhere (left the TX as is) * Improve AM RX audio (demodulator getting saturated/overloaded in Quansheng firmware) * TX power menu now has user option (1~16), goes from near zero to about 200mW, good for local personal nodes etc * Better backlight times (inc always on) * Live DTMF decoder option, though the decoder needs some changes to become less prone to noise/speech * AIRCOPY RX'ing radio now requests packet resends from TX'ing radio if RX'ed packet is lost/corrupted * .. # Symbol information <img src="/images/symbols.png" /> # Compiler arm-none-eabi GCC version 10.3.1 is recommended, which is the current version on Ubuntu 22.04.03 LTS. Other versions may generate a flash file that is too big. You can get an appropriate version from: https://developer.arm.com/downloads/-/gnu-rm clang may be used but isn't fully supported. Resulting binaries may also be bigger. You can get it from: https://releases.llvm.org/download.html # Building To build the firmware, you need to fetch the submodules and then run make: ``` git submodule update --init --recursive --depth=1 make ``` To compile directly in windows without the need of a linux virtual machine: ``` 1. Download and install "gcc-arm-none-eabi-10.3-2021.10-win32.exe" from https://developer.arm.com/downloads/-/gnu-rm 2. Download and install "gnu_make-3.81.exe" from https://gnuwin32.sourceforge.net/packages/make.htm 3. If need be (probably not), also download Dependency.zip that includes the library files from https://gnuwin32.sourceforge.net/packages/make.htm 3. You may need to (I didn't) manualy add gcc path to your OS environment PATH. ie add C:\Program Files (x86)\GNU Arm Embedded Toolchain\10 2021.10\bin 4. You may need to reboot your PC after installing the above ``` Then you can run 'win_make.bat' from the directory you saved this source code too. You may need to edit the bat file (path to make.exe) depending on where you installed the above two packages too. I've left some notes in the win_make.bat file to maybe help with stuff. # Credits Many thanks to various people on Telegram for putting up with me during this effort and helping: * [DualTachyon](https://github.com/DualTachyon) * [Mikhail](https://github.com/fagci) * [Andrej](https://github.com/Tunas1337) * [Manuel](https://github.com/manujedi) * @wagner * @Lohtse Shar * [@Matoz](https://github.com/spm81) * @Davide * @Ismo OH2FTG * [OneOfEleven](https://github.com/OneOfEleven) * @d1ced95 * and others I forget # License Copyright 2023 Dual Tachyon https://github.com/DualTachyon Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. # Example changes/updates <p float="left"> <img src="/images/image1.png" width=300 /> <img src="/images/image4.png" width=300 /> <img src="/images/single_vfo_mode.png" width=600 /> </p> <img src="/images/UV_K5_8_antenna.png" /> <img src="/images/UV_K5_8_antenna_text.png" /> <video src="https://github.com/OneOfEleven/uv-k5-firmware-custom/assets/51590168/921162a7-e9f2-4023-b4d5-526567f8b989"></video> # WARNING if trying to use K5/K6 to TX out of band .. Most of the radios TX energy is concentrated into the harmonics and other spurious carriers rather than within the fundamental .. <img src="/images/TX_51MHz.png" /> <img src="/images/TX_70MHz.png" /> You have been warned ! ", Assign "at most 3 tags" to the expected json: {"id":"2547","tags":[]} "only from the tags list I provide: [{"id":77,"name":"3d"},{"id":89,"name":"agent"},{"id":17,"name":"ai"},{"id":54,"name":"algorithm"},{"id":24,"name":"api"},{"id":44,"name":"authentication"},{"id":3,"name":"aws"},{"id":27,"name":"backend"},{"id":60,"name":"benchmark"},{"id":72,"name":"best-practices"},{"id":39,"name":"bitcoin"},{"id":37,"name":"blockchain"},{"id":1,"name":"blog"},{"id":45,"name":"bundler"},{"id":58,"name":"cache"},{"id":21,"name":"chat"},{"id":49,"name":"cicd"},{"id":4,"name":"cli"},{"id":64,"name":"cloud-native"},{"id":48,"name":"cms"},{"id":61,"name":"compiler"},{"id":68,"name":"containerization"},{"id":92,"name":"crm"},{"id":34,"name":"data"},{"id":47,"name":"database"},{"id":8,"name":"declarative-gui "},{"id":9,"name":"deploy-tool"},{"id":53,"name":"desktop-app"},{"id":6,"name":"dev-exp-lib"},{"id":59,"name":"dev-tool"},{"id":13,"name":"ecommerce"},{"id":26,"name":"editor"},{"id":66,"name":"emulator"},{"id":62,"name":"filesystem"},{"id":80,"name":"finance"},{"id":15,"name":"firmware"},{"id":73,"name":"for-fun"},{"id":2,"name":"framework"},{"id":11,"name":"frontend"},{"id":22,"name":"game"},{"id":81,"name":"game-engine "},{"id":23,"name":"graphql"},{"id":84,"name":"gui"},{"id":91,"name":"http"},{"id":5,"name":"http-client"},{"id":51,"name":"iac"},{"id":30,"name":"ide"},{"id":78,"name":"iot"},{"id":40,"name":"json"},{"id":83,"name":"julian"},{"id":38,"name":"k8s"},{"id":31,"name":"language"},{"id":10,"name":"learning-resource"},{"id":33,"name":"lib"},{"id":41,"name":"linter"},{"id":28,"name":"lms"},{"id":16,"name":"logging"},{"id":76,"name":"low-code"},{"id":90,"name":"message-queue"},{"id":42,"name":"mobile-app"},{"id":18,"name":"monitoring"},{"id":36,"name":"networking"},{"id":7,"name":"node-version"},{"id":55,"name":"nosql"},{"id":57,"name":"observability"},{"id":46,"name":"orm"},{"id":52,"name":"os"},{"id":14,"name":"parser"},{"id":74,"name":"react"},{"id":82,"name":"real-time"},{"id":56,"name":"robot"},{"id":65,"name":"runtime"},{"id":32,"name":"sdk"},{"id":71,"name":"search"},{"id":63,"name":"secrets"},{"id":25,"name":"security"},{"id":85,"name":"server"},{"id":86,"name":"serverless"},{"id":70,"name":"storage"},{"id":75,"name":"system-design"},{"id":79,"name":"terminal"},{"id":29,"name":"testing"},{"id":12,"name":"ui"},{"id":50,"name":"ux"},{"id":88,"name":"video"},{"id":20,"name":"web-app"},{"id":35,"name":"web-server"},{"id":43,"name":"webassembly"},{"id":69,"name":"workflow"},{"id":87,"name":"yaml"}]" returns me the "expected json"